• Categories:company news
• Author:
• Origin:
• Time of issue:2019-12-02 15:25
• Views:

(Summary description)In the lighting plate, due to the resin and fiber type, quality and dosage ratio is different, its performance is very big.


An-resistant lighting panels choose different grades of glass fiber and resin, adjust the amount of the ratio of the two, can be a wide range of changes in the optical properties of optical panels and physical and mechanical properties. In general, the use of glass cloth made of light transmission composite material strength is higher than the glass fiber felt made with a light board strength 1 to 2 times higher. Selection of heat-resistant transparent resin, can make the use of fire-resistant panels to increase the temperature to 100 ℃ or more, the choice of flame-retardant resin, can make the fire-resistant properties of fire-resistant panels to achieve self-extinguishing effect.

An Yun lighting board of the superior performance, mainly for the following points.

(1) excellent impact resistance. The impact toughness of Anne Lighting Board is much better than that of traditional glass lighting materials. It is not afraid of hail and collision, will not happen as glass as a result of temperature changes caused by blew phenomenon. Therefore, the use of Anning lighting board lighting than the use of glass safety. Therefore, the installation of anti-lighting for the glass can not be competent lighting projects, such as industrial plant flat skylight lighting, flammable and explosive sparks of the factory lighting and hail and temperature changes in the rapid changes in agriculture, fishing greenhouse lighting.

(2) Annai lighting plate light transmittance of up to 85%, the maximum can reach 90%, and glass transmittance similar. But it has sufficient strength and stiffness, both the performance characteristics of lighting and structural materials. Is a kind of multi-functional material which can transmit light and can bear the structural load. Use it instead of glass lighting, can simplify the design, reduce the lighting structure of the structural materials (window frames, sash, etc.). Greatly improve the lighting effect and reduce the cost of lighting projects.

(3) thermal conductivity is small. The thermal conductivity of the glass is 1.392 W / (m.k), while the thermal conductivity of the Anzhen lighting plate is only 0.232W (m.k), 5 times more than the glass. Therefore, the design of factories and housing lighting with Anne Lighting panels, whether in the cold areas in winter heating, or in the summer cooling in the south, can effectively save energy.

(4) light transmission uniform. An-resistant lighting panels can be made into non-homogeneous materials, through which light will produce scattering, which will make indoor light uniform, no light, not dazzling, especially for finishing workshops, sports venues and shopping malls open wells Lighting and so on.

(5) light high strength. The relative density of the light-transmissive composite material is 1.5 to 1.9, which is about 60 to 70% of the relative density of the glass. Therefore, the quality per square meter of composite lighting board area is only equivalent to 20% of the glass quality, Anning lighting plate tensile strength, bending strength 1 to 8 times higher than the glass. Therefore, the use of Anzhen lighting board can greatly reduce the weight of lighting products, increase the size of lighting components, improve the lighting project installation efficiency, reduce project cost.

(6) excellent performance can be designed. Anzhen lighting board of the biggest advantages, is based on the conditions of use requirements, the physical and mechanical properties of its design, such as strength design, light transmission and through the light quality design, heat and flame resistance design. But also according to decorative engineering requirements, any coloring, so that products bright color, is conducive to the construction of the municipal construction of the lighting project.

(7) easy to shape. In addition to a variety of corrugated board, one can create complex shapes of large-size lighting products. It is very beneficial to facilitate the construction and reduce the project cost.

(8) construction and transportation convenience. Annai lighting board products of small quality, impact toughness, in the construction and transportation process will not be damaged, and the general glass in the construction and transportation process to be damaged about 5%, the use of An-resistant panels can reduce the loss and reduce the project cost The

(9) durability, and generally unprotected lighting board products, warranty 3 to 4 years later, the intensity and light transmission rate will be reduced, but the Anzhen lighting board to take anti-aging treatment, the service life of up to More than 20 years, that is 20 years after the use of light transmittance can still be maintained at around 70%.

(10) The transparency of the lighting board is low (the transparency and the light transmittance are not the same) up to 90%, much lower t